 |
Hall Effect sensor Library 1.0.0
Hall Effect Sensor library (Analog and Digital, regular and EasyC)
|
|
Hall Effect sensor Library 1.0.0
Hall Effect Sensor library (Analog and Digital, regular and EasyC)
|
 |
|---|
| Hall effect sensor breakout with analog output |
 |
|---|
| Hall effect sensor breakout with digital output |
 |
|---|
| Hall effect sensor breakout with analog output & easyC |
| |
|---|
| Hall effect sensor breakout with digital output & easyC |
The analog Hall Effect sensor will be able to detect the magnetic field in its vicinity thanks to the aforementioned physical law. A magnetic field that can be created by a magnet, a current flowing through a conductor or some third source, the Hall effect sensor will recognize each. The stronger the magnetic field, the higher the voltage will be at the output of this sensor, so it is a sensor with analog output. Available as an EasyC board and standalone.
The digital Hall Effect sensor will be able to detect the magnetic field in its vicinity thanks to the aforementioned physical law. A magnetic field that can be created by a magnet, a current flowing through a conductor or some third source, the Hall effect sensor will recognize each. This sensor has a programmed threshold at which it will change the state of its output signal, so it is a sensor with a digital output. Available as an EasyC board and standalone.
You can find hardware design for this board in Hall effect sensor breakout with analog output hardware repository.
You can find hardware design for this board in Hall effect sensor breakout with digital output hardware repository.
You can find hardware design for this board in Hall effect sensor breakout with digital output & easyC hardware repository.
You can find hardware design for this board in Hall effect sensor breakout with analog output & easyC hardware repository.
Access Arduino library documentation here.
The library is compatible with board & microcontroller families shown in green below:
At Soldered, we design and manufacture a wide selection of electronic products to help you turn your ideas into acts and bring you one step closer to your final project. Our products are intented for makers and crafted in-house by our experienced team in Osijek, Croatia. We believe that sharing is a crucial element for improvement and innovation, and we work hard to stay connected with all our makers regardless of their skill or experience level. Therefore, all our products are open-source. Finally, we always have your back. If you face any problem concerning either your shopping experience or your electronics project, our team will help you deal with it, offering efficient customer service and cost-free technical support anytime. Some of those might be useful for you:
Soldered invests vast amounts of time into hardware & software for these products, which are all open-source. Please support future development by buying one of our products.
Check license details in the LICENSE file. Long story short, use these open-source files for any purpose you want to, as long as you apply the same open-source licence to it and disclose the original source. No warranty - all designs in this repository are distributed in the hope that they will be useful, but without any warranty. They are provided "AS IS", therefore without warranty of any kind, either expressed or implied. The entire quality and performance of what you do with the contents of this repository are your responsibility. In no event, Soldered (TAVU) will be liable for your damages, losses, including any general, special, incidental or consequential damage arising out of the use or inability to use the contents of this repository.
And thank you from your fellow makers at Soldered Electronics.
1.12.0.
Dark theme by Tilen Majerle. All rights reserved.
Copyright: Soldered