
1-channel relay board with easyC


2-channel relay board with easyC


4-channel relay board with easyC

Did you ever wanted to turn on and off a device that needs large current or voltage? Whether operating on DC or AC, a relay is what you need. A relay is actually an electronic switch that is activated by a signal we send from a Dasduino or Arduino. This module further simplifies the whole process because it contains everything you need for the relay to work, and you just have to connect it to the microcontroller and power supply. You don’t have to think about voltages and currents, insulation between high and low voltage or grounding, everything is already taken care of on the board.

This board has easyC connector. Thanks to easyC ecosystem, this board can be connected using off-the-shelf cables, without soldering. Controlling the is as simple as it gets, too. Learn more about easyC here.

Max. DC voltage and current: 30V, 10A
Max. AC voltage and current: 250V, 10A
Number of relays: 1 relay
Dimensions: 70 x 22 mm (https://www.soldered.com/en/easyC)

Repository Contents

**/src** - source files for the library (.h & .cpp)
**/examples** - examples for using the library
other - keywords file highlights function words in your IDE, library.properties enables implementation with Arduino Library Manager.

Hardware design

You can find hardware design for this board in 1-channel relay board with easyC hardware repository.

You can find hardware design for this board in 2-channel relay board with easyC hardware repository.

You can find hardware design for this board in 4-channel relay board with easyC hardware repository.

Documentation

Access Arduino library documentation here.

Tutorial for using the relay board with easyC
Installing an Arduino library

Board compatibility

The library is compatible with board & microcontroller families shown in green below:

About Soldered

At Soldered, we design and manufacture a wide selection of electronic products to help you turn your ideas into acts and bring you one step closer to your final project. Our products are intented for makers and crafted in-house by our experienced team in Osijek, Croatia. We believe that sharing is a crucial element for improvement and innovation, and we work hard to stay connected with all our makers regardless of their skill or experience level. Therefore, all our products are open-source. Finally, we always have your back. If you face any problem concerning either your shopping experience or your electronics project, our team will help you deal with it, offering efficient customer service and cost-free technical support anytime. Some of those might be useful for you:

Open-source license

Soldered invests vast amounts of time into hardware & software for these products, which are all open-source. Please support future development by buying one of our products.

Check license details in the LICENSE file. Long story short, use these open-source files for any purpose you want to, as long as you apply the same open-source licence to it and disclose the original source. No warranty - all designs in this repository are distributed in the hope that they will be useful, but without any warranty. They are provided "AS IS", therefore without warranty of any kind, either expressed or implied. The entire quality and performance of what you do with the contents of this repository are your responsibility. In no event, Soldered (TAVU) will be liable for your damages, losses, including any general, special, incidental or consequential damage arising out of the use or inability to use the contents of this repository.

Have fun!

And thank you from your fellow makers at Soldered Electronics.