#include <ADS1X15.h>

Inherits ADS1X15.

Public Member Functions
	ADS1015 (uint8_t Address=ADS1015_ADDRESS, TwoWire *wire=&Wire)
int16_t	readADC_Differential_0_3 ()
int16_t	readADC_Differential_1_3 ()
int16_t	readADC_Differential_2_3 ()
int16_t	readADC_Differential_0_2 ()
int16_t	readADC_Differential_1_2 ()
void	requestADC_Differential_0_3 ()
void	requestADC_Differential_1_3 ()
void	requestADC_Differential_2_3 ()
Public Member Functions inherited from ADS1X15
void	reset ()
bool	begin (uint8_t sda, uint8_t scl)
bool	begin ()
bool	isConnected ()
void	setGain (uint8_t gain=0)
uint8_t	getGain ()
float	toVoltage (int16_t val=1)
float	getMaxVoltage ()
void	setMode (uint8_t mode=1)
uint8_t	getMode ()
void	setDataRate (uint8_t dataRate=4)
uint8_t	getDataRate ()
int16_t	readADC (uint8_t pin)
int16_t	readADC_Differential_0_1 ()
int16_t	getLastValue ()
int16_t	getValue ()
void	requestADC (uint8_t pin)
void	requestADC_Differential_0_1 ()
bool	isBusy ()
bool	isReady ()
void	setComparatorMode (uint8_t mode)
uint8_t	getComparatorMode ()
void	setComparatorPolarity (uint8_t pol)
uint8_t	getComparatorPolarity ()
void	setComparatorLatch (uint8_t latch)
uint8_t	getComparatorLatch ()
void	setComparatorQueConvert (uint8_t mode)
uint8_t	getComparatorQueConvert ()
void	setComparatorThresholdLow (int16_t lo)
int16_t	getComparatorThresholdLow ()
void	setComparatorThresholdHigh (int16_t hi)
int16_t	getComparatorThresholdHigh ()
int8_t	getError ()
void	setWireClock (uint32_t clockSpeed)
uint32_t	getWireClock ()

Additional Inherited Members
Protected Member Functions inherited from ADS1X15
	ADS1X15 ()
int16_t	_readADC (uint16_t readmode)
void	_requestADC (uint16_t readmode)
bool	_writeRegister (uint8_t address, uint8_t reg, uint16_t value)
uint16_t	_readRegister (uint8_t address, uint8_t reg)
Protected Attributes inherited from ADS1X15
uint8_t	_config
uint8_t	_maxPorts
uint8_t	_address
uint8_t	_conversionDelay
uint8_t	_bitShift
uint16_t	_gain
uint16_t	_mode
uint16_t	_datarate
uint8_t	_compMode
uint8_t	_compPol
uint8_t	_compLatch
uint8_t	_compQueConvert
int8_t	_err = ADS1X15_OK
TwoWire *	_wire
uint32_t	_clockSpeed = 0

Constructor & Destructor Documentation

◆ ADS1015()

ADS1015::ADS1015	(	uint8_t	Address = ADS1015_ADDRESS,
		TwoWire *	wire = &Wire )

int16_t ADS1015::readADC_Differential_0_2 ( )

int16_t ADS1015::readADC_Differential_0_3 ( )

int16_t ADS1015::readADC_Differential_1_2 ( )

int16_t ADS1015::readADC_Differential_1_3 ( )

int16_t ADS1015::readADC_Differential_2_3 ( )

void ADS1015::requestADC_Differential_0_3 ( )

void ADS1015::requestADC_Differential_1_3 ( )

void ADS1015::requestADC_Differential_2_3 ( )

The documentation for this class was generated from the following files: